Technical data
Version: 2.7
───
41
AG3210
4.7.1
Dimension drawing NP045
1-stage
• All figures in millimeters
• Dimensions without tolerance ± 1 mm
• Center bore according to DIN 332-DR M16x32
• Feather key according to DIN 6885-A 12x12x70
Position
Explanation
K
Clamping hub diameter up to 38 mm
1)
Check motor shaft adaptation
2)
Smallest or largest permissible motor shaft length. Longer motor shafts are possible; please
contact us.
3)
Dimensions are dependent on the motor
4)
Smaller motor shaft diameters are adaptable using a spacer sleeve with a minimum wall thick-
ness of 1 mm
