Mechanical installation
84
───
Version: 2.8
AG2250
8.3.2
Mounting
► Carefully degrease the following components with a cloth:
• Contact surfaces with adjacent components
• Output shaft and centering
There are four threaded holes [1] to [4] in the gear unit housing for
the bolted connection with your machine
► Coat suitable screws with threadlocker
► Fasten the gear unit to the machine by screwing the correct
screws into the threaded holes [1] to [4]
► Make sure that the surface of the machine has a low roughness
► Attach the gear unit such that the screw plug faces downward
and the name plate is readable
Tightening torques
In the following you will find supplementary information regarding
the attachment of the gear unit to a machine:
Quality of the screws = strength class 12.9
Gear
unit
Pitch circle diam-
eter [mm]
Thread
Tightening torque
[Nm]
040
34
M4 x 6
4.55
060
52
M5 x 8
9
080
70
M6 x 10
15.40
120
100
M10 x 16
73.50
160
145
M12 x 20
126
Summary of Contents for AG2250
Page 1: ...Operating instructions EN AG2250 Planetary gear unit 4 13 2022 Version 2 8 ...
Page 2: ......
Page 94: ......