Beckhoff AG2250, Operating Instructions Manual

Page: 14 / 95

For your safety
14 ─── Version: 2.8 AG2250
2.1.2
During operation
Do not touch hot surfaces
Check the cooling of the surfaces with a thermometer. Do not touch
the components during and immediately after operation. Allow the
components to cool sufficiently after switching off.
Avoid overheating
Operate the components according to the technical specifications.
Refer here to the chapter: "Technical data". Provide for sufficient
cooling. Switch the components off immediately if the temperature is
too high.
Do not touch any moving or rotating components
Do not touch any moving or rotating components. Fasten all parts or
components on the machine or plant.
2.1.3
After operation
De-energize and switch off components before working on
them
Check the functionality of all safety-relevant devices. Secure the
working environment. Secure the machine or plant against being in-
advertently started up. Observe the chapter: "Decommissioning".
No direct skin contact with solvents or lubricants
In case of improper use, the solvents or lubricants used can lead to
skin irritations. Therefore, avoid direct skin contact.