106
Using Navigation
Entering destination street
Select
Road:
with the right rotary control and
press the control to confirm.
If the
Road
entry is not available, no streets are se-
lectable in the selected town. If you select
Cen-
tre
, the programme switches to the town centre.
Select the letters in sequence by turning the right
rotary control
and press the control to confirm.
The selected letter appears enlarged at the right of
the display.
Use multifunction button
, to delete the last
confirmed letter.
The complete entry can be deleted by pressing
multifunction button
for more than
2 seconds.
Letters which are already entered are displayed in-
versely. To help, the street name most similar to
the entry so far is displayed. The unit offers only
the possible remaining letters for selection.
If no other entries are available, the unit completes
the street name.
To accept the entry, press and hold the right rotary
control
for more than 2 seconds or select the
small check mark
and briefly press the right ro-
tary control
.
If the street name was entered completely or auto-
matically completed, the programme switches ei-
ther to the road differentiation list (the same street
name exists more than once in the location select-
ed) or returns to the destination entry.
If an incomplete location entry was confirmed, the
street selection list is displayed.
The street name most similar to the entry appears
in capital letters in the road selection list.
The scroll marks indicate that other streets, sorted
in alphabetical order, can be selected.
Select the street by turning the right rotary
control
and press the control to confirm.
If a unique entry is entered, the programme returns
to the destination entry.
If the entry is not unique (the same street exists
more than once in the same location), the street dif-
ferentiation list is shown.
Select the required part of town using the right ro-
tary control
and press the control to confirm.
The programme returns to the destination entry.
If available, you may select a street number or in-
tersection. Select
Start
... to start the route calcu-
lation.
Entering the destination town centre
Use the right rotary control to select
Centre
and press the control to confirm.
If the previously selected location has only one
centre, the programme immediately returns to the
destination entry.
If the number of centres is less than 10, the centre
list is displayed.
Select the centre by turning the right rotary
control
and press the control to confirm.
If the number of centres is greater than 9, the pro-
gramme switches to centre entry.