100
General operation
Fader
Press the source key for more than 2 seconds. Press
multifunction button
.
Use the right rotary control
for the desired fader
setting.
Adjusting the balance
Press the source key for more than 2 seconds. Press
multifunction button
.
Set the desired balance level using the right rotary
control
.
Linear adjustment
Press the source key for more than 2 seconds.
Press multifunction button
briefly -
Tone
flat
will appear. By pressing multifunction
button
once again, the tone adjustments for
the current signal source (i.e. FM) will be reset to
mid-level.
Loudness on or off
Press the source key for more than 2 seconds. Press
multifunction button
.
With multifunction button
you can select
either Loudness on (
ON
) or Loudness off (
OFF
).
Adjust volume of subwoofer or centre
speaker
Press the source key for more than 2 seconds. Press
multifunction button
.
Use the right rotary control
to set the desired
subwoofer volume level.
If
Off
is set for the volume setting, the subwoofer
output is switched off.
Triggering reset
If a malfunction of the unit should occur, such that
it becomes inoperable or defective in some other
way, a restart of the internal unit software (reset)
can be triggered.
To trigger the reset, press the button
for more
than 20 seconds.
After the unit software is reset, you need to enter
the code number and re-insert the Navigations CD.