Becker Centronic UnitControl UCS520, Operating Instructions Manual, Page: 18 / 52

18
Operating Instructions
The UCS520 should only be used to control sun protection systems.
This device may only be used in connection with equipment from other manu-
facturers following consultation with your local retailer.
• Please note that radio sets cannot be operated in areas with increased risk of
interference (e.g. hospitals, airports).
• The remote control is only permitted for equipment and systems with which a
malfunction in the handheld transmitter or receiver does not present a risk to
persons, animals or objects, or this risk is covered by other safety devices.
• The operator does not enjoy any protection from disturbances by other re-
mote signalling equipment and terminal equipment (for example, also by
radio sets operated in the same frequency range in accordance with regula-
tions).
• Use radio receivers in conjunction only with devices and systems permitted
by the manufacturer.
Note
Ensure that the controls are not installed and operated in the vicinity of
metal surfaces or magnetic fi elds. Radio sets transmitting at the same
frequency could interfere with reception. It should be noted that the
range of the radio signal is restricted by legislation and constructional
measures.
Intended use
Assembly/connection