26
27
NOTICE
• If the gasoline engine frequently works under high temperature or
heavy load, change the oil every 25 hours.
• If the engine frequently work under dusty or other severe
circumstances, clean the air filter element every 10 hours; If
necessary, change the air filter element every 25 hours.
• The maintenance period and the exact time (hour), the one which
comes first should govern.
• If you have missed the scheduled time to maintain your engine, do it
as soon as possible.
WARNING
• Stop the engine before servicing. Put the engine on a level surface
and remove the spark plug cap to prevent the engine from starting.
• Do not operate the engine in a poorly ventilated room or other
enclosed area. Be sure to keep good ventilation in working area. The
exhaust from the engine may contain poisonous CO, inhalation can
cause shock, unconsciousness and even death.
7.1 Spark plug inspection
The spark plug is important engine components, which should be
checked periodically.
1. Remove the cap (1), and use the tool (3) remove the spark plug cap
(2), and Insert the tool (5) through the hole from the outside of the
cover.
2. Insert the handlebar (4) into the tool (5) and turn it counterclockwise
to remove the spark plug.
3. Check for discoloration and remove the carbon. The porcelain insulator
around the center electrode of spark plug should be a medium-to-light
tan color.
4. Check the spark plug type and gap.
Standard Spark Plug:
TORCH-A5RTC/E6TC/E6RTC
Spark Plug Gap: 0.6-0.8mm (0.024-0.028in)
TIP:
The spark plug gap should be measured with a wire thickness
gauge and, If necessary, adjusted to specification.
5. Install the spark plug.
Spark Plug Torque: 12.5 N*m (1.25 kgf*m, 9 lbf*ft)
TIP:
If a torque wrench is not available when installing a spark plug, a
good estimate of the correct torque is 1/4-1/2 turn past finger tight.
However, the spark plug should be tightened to the specified torque as
soon as possible.
6. Install the spark plug cap and spark plug cover.
MAINTENANCE
MAINTENANCE
1200I
2100I
