34
Place the volcanic rock on top of the centre burner as shown. Ensure a 4
-
5 mm gap is left
between each piece. Then using
half
of the glowing ember wire supplied (Tools & Fittings Pack),
ruffle between fingers to make it loose and about 20mm wide then align over the volcanic rock
as shown. Ensure no wire is placed within 25mm of the pilot assembly. Retain the other half of
the wire for replacement at annual service.
FUELBED
Place Log A in the orientation shown ensuring it fits neatly into the locating features as shown below.
Place Log B onto the left raised burner as shown ensuring it fits securely.
INSTALLATION
INSTRUCTIONS
