24
INSTALLATION
INSTRUCTIONS
SLIM TRIM
INSTALLATION
3.9.1
The
800CF Slim Trim
is supplied with the appliance. Remove this trim and place
somewhere that damage cannot occur whilst preparing the installation.
The appliance is already prepared for installation of this trim, with the exception of
the two vertical side wings. These wings allow the 800 Slim trim to be screwed to
the appliance to hold it securely in the required position. To fit these vertical side
wings 6 knockouts must first be removed to allow for screw fixings, 3 on each side.
The diagrams below show these knockout positions. The side knockouts allow the
fixing of the two side wings.
Fit the two side wings as shown below. Note the fine slits at the top and bottom of
the side plates, these slits allow the 800 Slim trim to be fixed in multiple positions
depending on the thickness of the wall lining, allowing the trim to be held tightly
against the wall surface.
The appliance is now ready to accept the
800 Slim
Trim
once the appliance has been installed.
Removal of the Slim trim requires the removal of
the inner 4 screws. Then simply ease the trim
forwards as it disengages from the upper support
brackets.
