15
INSTALLATION
INSTRUCTIONS
UNPACKING THE
APPLIANCE
3.0 TAKE GREAT CARE WHEN UNPACKING THE APPLIANCE—SOME PARTS CAN
BE EASILY DAMAGED.
Once the carton has been opened, carefully remove the polystyrene
packing components to reveal the appliance.
The appliance has two handles, one on each side, as shown in the diagram
below.
These handles are for initial handling only, they should be
removed prior to the installation into the fireplace opening.
The
800CF Slim Trim
is supplied with the appliance. The
800CF Wide Trim
is
an optional extra.
Carefully lift the appliance from the carton using the
handles then remove and check the accessory packs
before commencing the installation.
Carefully remove the
800CF Slim Trim
from the mouth of the appliance. If the
800CF Wide Trim
is being fitted, this can be discarded.
There will be
four
plastic bags also located in the carton:
Instructions and guarantee registration form. Note that the guarantee
registration can be performed online at:
https://www.elginandhall.co.uk/advice/warranties/
