7
Caution
• The clipper REF 5513E must be used with REF 5514 series charger�
• Disposable single use blades (REF 4406, 4403A and 4412A)
are designed for optimal use with 5513E only� Using blades not
manufactured or approved by BD will void any warranty and
patient results cannot be predicted�
• Do not submerse Clipper in water or other solution deeper than
3�3 feet (1 m) for no longer than 30 minutes�
• Do not plug in with wet hands� Do not connect to charging
adapter if clipper is wet�
• Keep charging adapter cord away from heated surfaces�
• Do not position charging adapter where it is difficult to unplug�
• Do not place the Clipper on the charging adapter until charging
adapter is seated on a flat surface or securely mounted to a wall�
• Prior to charging Clipper ensure charging adapter is free of
metallic debris�
• Do not use near flammable anesthetic, aerosol spray or oxygen
— administering equipment other than nasal or mask types�
• Do not expose to hot water, salt water, organic solvents or
bleach solutions�
• Do not use hydrocarbon or phenol based cleaners or cleaners
containing acetone or ketones�
• Do not use with damaged blade, handle, or both�
• Do not replace supply cord� If supply cord is damaged return to
manufacturer or service agent for replacement, to avoid hazard�
• Do not sterilize�
• Do not take the housing apart as this can affect the watertight
construction�
• Operating Clipper without blade could lead to injury�
• Service or repair must be performed only by qualified repair
personnel� Service or repair performed by unqualified personnel
may result in a risk of injury, electric shock or fire�
Caution (continued)
• Except when charging, it is recommended to unplug the charging
adapter from the electrical outlet� This will reduce overall energy
consumption and is compliant with best practices�
• Do not leave Clipper running without applying to skin for more
than 1 minute as blade temperature may exceed 60 °C and
potentially leading to thermal injury�
• During use, do not keep the Clipper blade applied to the same
position of the patient’s skin for longer than 1 minute (these
operations may result in blade surface becoming hot)�
• Inspect treatment site for selection of appropriate blade� If skin
irregularities are present, proceed with caution�
• In cases of minor injury, seek medical treatment if necessary�
• Healthcare personnel should instruct patient to avoid sudden
movement during clipping process�
Notes
• Avoid charging in direct sunlight or near radiating heat�
• When not used for extended periods of time, charge every six
months to preserve battery life�
• Clipper contains a Lithium-ion battery� Dispose of at an
officially assigned location, if available�
• The battery in this Clipper is not intended to be replaced
by users� Diagram #6 is intended only for removal of the
chargeable battery for the purpose of proper disposal�
• Do not apply Clipper blade to injured skin area�
Any serious incident that has occurred in relation to the device
should be reported to BD at bd�com and the Competent
Authority of the Member State�
Summary of Contents for 5513E
