10 January 2018
#1050312D 2013-17 Dodge FlowMax Lift Pump Kit
(I-00424)
- 12 -
BD Engine Brake Inc.
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295 U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
FlowMax Pump Mounting
This kit is supplied with self-threading bolts and
matching washers to allow for direct mounting to
the frame if desired. This is not the suggested
installation method for most vehicles. See bottom
of instructions for optional frame mounting or
continue reading for normal installation method.
Strap Mount vs. Direct Frame
Mount
Insert the three vibration isolators (1500356) into
the pump bracket (1500355). Install the three M8
bolts (1900015) with the three M8 washers
(1402609) and bolt to the frame mount bracket
(1500373).
Position the frame mount bracket on the
outside
driver side of the frame and determine mounting
location. The suggested location is below the
driver’s door, just behind the front lower control
arm mounting point.
On the inboard side of the frame, pop out the
fuel/brake line retaining bracket and the wiring
harness clip. This will allow for installation of the
band straps.
Isolator
Pump Bracket
Washer
