10 January 2018
#1050312D 2013-17 Dodge FlowMax Lift Pump Kit
(I-00424)
- 19 -
BD Engine Brake Inc.
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295 U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
Finally, plug in the FlowMax pump to the wiring
harness that was installed earlier.
Use a wire tie to hold the harness to the ground
strap wire on the frame.
All of the fuel line routing should be complete. Check the lines are adequately
supported. Ensure no fuel hose is exposed to possible chafing as that can rub through
the hose.
Installation should now be complete. Reconnect batteries, and test the pump for
operation. Upon key on, you should hear the pump running.
If the pump motor does not run or there is a pressure or supply issue, refer to the end
of the manual for troubleshooting.
