BCN3D ignis, Instruction Manual

Page: 39 / 55

Instruction Manual 39
Stopping and emergency stops
Start-
Pause
Enter
Esc
Esc
There are three types of stops while completing a task
or when the machine is processing. The following will
describe the functions of each one of them and actions
to be complete once activated.
A stop from display (cancel task)
The Start-Pause function makes a controlled stop.
The head will stop and the cover can be opened. Once
closed, the task can be resumed from the same point
where it was paused using start/Pause botton or press
the Esc button to cancel the task.
A stop by raising the cover
When the cover is raised in the middle of a task,
the head will stop. When the cover is closed again,
the screen will show the options to cancel the task
(pressing the Esc button) and resume the task from
the same point where it was paused (pressing the
Enter button).
Start-
Pause
Esc
Esc Enter