BCN3D ignis, Instruction Manual

Page: 19 / 55

Instruction Manual 19
Transport
Storage conditions
Installation conditions
Transport - Storage - Installation
The machine will be transported by the manufacturer or, otherwise, by an authorised distributor.
The manufacturer is responsible for unloading, adjusting and tuning the components.
In the event of damage or missing parts, the machine shall not be released. The procedure for checking compo-
nents and inspecting damage shall be carried out by the manufacturer or, otherwise, by an authorised distributor.
The buyer is responsible for demanding the machine to be appropriately tuned and adjusted.
The buyer is responsible for alerting of any error, missing or damaged component of the machine after its installa-
tion and tuning.
The storage condition should not generate any risk to the integrity or functionality of the machine or its compo-
nents, and the user is responsible for ensuring the machine is stored appropriately. The machine should be stored
in a dry environment and at temperatures ranging between 10ºC (min. temp.) and 40ºC (max. temp.). The machine
should be kept away from traffic areas where it may suffer blows. Never store objects on top or inside the machine.
The final location of the machine should comply with
the minimum distances for installation as shown in the
image to the left.
The machine does not come with a smoke filter for the
ventilation system.
It is recommended to place the machine close to the
ventilation system, a pneumatic extraction system or
exterior access to make it easier to extract any smoke.
Never operate the machine without a filter or exterior
access.
It is recommended to place a fire extinguisher in an area
close to the machine to eliminate any risk caused by the
existence of a flame.
1 m
1 m
m
1
m 1