BCN3D ignis, Instruction Manual

Page: 32 / 55

32 Instruction Manual
Z/U Menu
“Origin set+”
When this function is selected, the following menu will
appear:
To move from the first menu, you need to press
the “Z/U” key. To select the desire options,
the keys are used and to accept each
option, you need to press the “enter” key.
Pay attention to see if the value from the “set origin”
or “next origin” has varied afterward, you need to press
the “enter” button to confirm the change.
Each one of the options from this mode are explained in
the following.
• Multiple origin enable: If this option is deactivated,
the system will only consider one origin, however
the “origin” key can be used to consider this
point. If the option is activated, the “origin” key is
deactivated and multiple origins can be considered.
• Origin enable 1/2/3/4: If the “multiple origin”
option is activated, any of these dots can be
activated or deactivated independently.
• Set origin 1/2/3/4: If the “enter” button is pressed,
it will define the origin number by selecting the
point x,y where the head is found.
• Next origin: Define the point to be considered as
the origin for the following task. If the number 0
is selected, the point defined as the origin prior to
activating the “multiple origin enable” will be used.
If a point between 1-4 is selected, it will consider
the point defined as the origin by selecting it wit
the “multiple origin”.
Warning: If “multiple origins” is selected, the “next
origin” selected is 1 and the four origins are activated,
when sending a task with the function “take the original
origin as current origin” the task will always start as a
different origin. The rotation will be: 1->2->3->4->1…