BCN3D ignis, Instruction Manual, Page: 22 / 55

22 Instruction Manual
9 Once this checklist is complete, press the “Install”
button.
10 The program will already be installed at this time.
11 Open RDWorks.
12 Press the “port setting” button on the bottom right.
14 Following this, press the test button. If you receive
a “port test failure” warning, test that the USB cable is
properly connected and the machine turned on, if this
is not the case and you see the warning “port test suc-
cess!”, this means that the USB setting is correct.
13 Double click with the left button of the mouse on
“USB:Auto”
Installing RDWorks