BCN3D ignis, Instruction Manual

Page: 23 / 55

Instruction Manual 23
Installing RDWorks
15 To connect the machine via Ethernet connect the
cable to the BCN3D-IGNIS and the computer. Following
this, press the “port setting” button again.
16 Press the “add” button
18 Once the status of the door is checked, press the
“Ok” button. The following screen will appear:
19 Actions to select the method of communication with
the BCN3D-IGNIS from the computer, as well as how
to modify, add or erase the previously set settings, this
can be done from this screen.
17 Choose the web option. If the pre-established value
is kept and the IP of the machine has not changed on the
display, when you press the test button “port test success”
will appear. If this does not occur, test the connection of the
cable Ethernet and the IP that appears on the display.