BCD-RGD-804P-MT
9
Click
“Add Interface”
Add a new IP interface.
IP router =
Interface items introduction:
Click
“Add Router”
to add a new IP route interface.
C. SNTP Time Server Configuration
Enter [System] → [SNTP] Navigation, Time server configuration page, can be turned on when the remote NTP server,
and configure remote SNTP time server, click [Save] button to complete time server configuration.
Interface items introduction:
Interface items
Configuration
Introduction
Factory Setting
Delete
Select / not selected
Select this option to delete an existing IP route.
not selected
Network
IP address
The destination IP network or host address of this
route. Valid format is dotted decimal notation or a
valid IPv6 notation. A default route can use the value
0.0.0.0 or IPv6 :: notation.
NO
Mask Length
1-32
The destination IP network or host mask, in number of
bits (prefix length). It defines how much of a network
address
not selected
that must match,
in order to qualify
for this route.
24
The IPv4 address of the interface in dotted decimal
notation.
192.168.0.240
Gateway
IP
The IP address of the IP gateway.
No
Interface items
Configuration
Introduction
Factory Setting
Mode
Disable/Enable
Indicates the NTP mode operation.
Disable
Server Address
Time server IP address Provide the IPv4 or IPv6 address of a NTP server.
No
