BCD-RGD-804P-MT
32
www.bcdvideo.com
Interface items
Configuration
Introduction
Factory setting
Source MAC Address
Select/not select The Source MAC address can be used to calculate the
destination port for the frame. Check to enable the use of
the Source MAC address, or uncheck to disable. By default,
Source MAC Address is enabled.
not select
Destination MAC Address
Select/not select The Destination MAC Address can be used to calculate the
destination port for the frame.
not select
IP Address
Select/not select The IP address can be used to calculate the destination
port for the frame.
not select
TCP/UDP Port Number
Select/not select The TCP/UDP port number can be used to calculate the
destination port for the frame.
not select
Interface items Configuration
Introduction
Factory setting
Group ID
Normal/1-5
Indicates the group ID for the settings contained in the same row.
Group ID "Normal" indicates there is no aggregation. Only one group
ID is valid per port.
Normal
Port Members
Select/not select Each switch port is listed for each group ID. Select a radio button to
include a port in an aggregation, or clear the radio button to remove
the port from the aggregation. By default, no ports belong to any
aggregation group. Only full duplex ports can join an aggregation
and ports must be in the same speed in each group.
not select
Aggregation algorithm mode:
Interface items introduction:
Aggregation configuration:
This configuration is used to configure the Aggregation hash mode and the aggregation group.
The aggregation hash mode settings are global, whereas the aggregation group relate to the currently selected stackunit,
as reflected by the page header.
