BCD-RGD-804P-MT
44
www.bcdvideo.com
Interface items
Introduction
Factory setting
Reserved Power
determined by
Class/Allocating /LLDP-MED
Class
Power Management
Mode
Actual Consumption/Reserved Power
Reserved Power
Tx Delay
After LLDP configuration change, time to re-transmission and the last time
interval between frames LLDP, <= 1/4 Tx Interval
2
TxReinit
Time interval between LLDP stop frame and a new start frame
2
Interface items
Introduction
Factory setting
Primary Power Supply[W]
2000
2000
Interface items
Introduction
Factory setting
PoE Mode
Disabled/PoE/PoE+
Disabled
Priority
Low/High
Low
Maximum Power[W]
15.4
Power Over Ethernet Configuration: Interface items introduction:
PoE Power Supply Configuration
PoE Port Configuration
5.2.2.13 MAC Table
Enter [MAC Table] navigation column, set the MAC address table dynamically updated timeout, MAC address table learning
mode, and manually add static MAC address table. Static MAC address table can add up to 64 MAC addresses.
Click<Add New Static Entry> button, enter the VLAN ID, a legitimate MAC address, select the port member, click [Save] button
to complete the configuration MAC address table.
