BCD-RGD-804P-MT
58
www.bcdvideo.com
Interface items
Configuration
Introduction
Factory setting
QCE#
QoS list item Index
Port
All/ port no
Includ port
Key Parameters Frame
Type
Any/Ethernet/LLC/SNAP/
IPV4/IPV6
Select the recognized frame type for the input data
flow
Any
Key Parameters SMAC
Any/Specific
Select the recognized MAC address OUI
(Organization ID) for the input data flow
Any
Key Parameters DMAC
Any/UC/MC/BC
Select a frame input data stream to identify the desti-
nation MAC address type:
Any: Destination can be any type of MAC
UC: Destination only to allow unicast MAC
MC: Destination only to allow multicast MAC
BC: Destination MAC only to allow broadcast
Any
Key Parameters VID
Any/Specific(1-4095)/
Range(VID1~VID2)
The frame VLAN ID range to be recognized of the
input data stream,
Any: All VLAN
Specific: a specific VLAN
Range: a VLAN range
Any
Key Parameters PCP
Any/0,1,2,3,4,5,6,7/0-1,
2-3,4-5,6-7,0-3,4-7
Select the recognized priority for the input data flow
Any
Key Parameters DEI
Any/0/1
Select the recognized discard flag for the frame of
input data flow
Any
Action Class
0-7
Add type value for frame matching key parameters
0
Action DPL
Default/0/1
Add discard value for frame matching key parameters
(Default: Retain the original DPL)
Default
Action DSCP
Default/0-63
Add DSCP value for frame matching key parameters
(Default: Retain the original DSCP)
Default
Interface items introduction:
F. Qos storm control configuration
Enter [Storm Control] navigation column, configure QoS port storm control, open for unicast, multicast, rate limit broad-
cast storms, and set rate. The main configuration items : Unicast (unicast frames), Multicast (multicast frames), Broadcast
(broadcast frames).
