27
Care and Maintenance
Outside Surfaces
CAUTION: NEVER USE ABRASIVE CLEANING AGENTS OR ABRSIVE MATERIALS
TO CLEAN THE PORCELAIN ENAMEL CASTINGS, AS THEY WILL PERMANENTLY
SCRATCH THE PORCELAIN ENAMEL SURFACE.
The porcelain finish of the Grill lid had a glass-like composition that should be handled with care so as
not to chip. Use mild dish washing detergent or baking soda and hot water solution. Non-abrasive
scouring powder can be used on stubborn stains, then rinse with water.
If the inside surface of the Grill lid has the appearance of peeling paint, baked on grease buildup has
turned to carbon and is flaking off. Clean thoroughly with strong solution of detergent and hot water.
Rinse with water and drying completely. NEVER USE OVEN CLEANER.
Plastic Surfaces
Wash with soft cloth and dish detergent and hot water solution. Rinse with water. Do not use
abrasive cleaners, degreasers or a connected grill cleaner on plastic parts.
Maintenance
Burner Adjustment
Use a screwdriver to loosen the locking screws. Open the shutter just enough to achieve the
desired soft, blue flames.
Make adjustment in small increments and allow the burner to come up to operating temperature
(10 minutes) before making further adjustments.
If burners are removed for cleaning or adjustment, always confirm that they have been reinstalled
correctly over the valve outlets (see Fig.12). The valves extend into the burner venturis
approximately 1/4”.
