RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
39
In the RPC Series’s main menu, #1 “Outlet
Control” and #4 “Unit Status” allow the user
to monitor and control the equipment
attached to each of the RPC’s eight
receptacles. Selection #3 puts the user into
the configuration menu for setting network
parameters, programming user login access,
and outlet configuration. Selection #2
allows the admin user to manage optional
users. Selection #5 resets the unit. A unit
reset is required for some changes to take
effect.
There are eight red LED’s on the front of the
RPC unit. There is a corresponding red
LED for each of the RPC’s eight
receptacles. If any or all of the LEDs are
illuminated, the corresponding receptacle(s)
are turned "ON," and consequently, attached
equipment is receiving power. If any one
(or all) of the LED’s are not illuminated, the
corresponding receptacle(s) are turned
“OFF.”
Accessing Main Menu
Power on the RPC unit. The following main
menu appears:
RPC-3 Telnet Host
Revision F 3.03, (C) 1998
Bay Technical Associates
Unit ID: RPC3
RPC-3 Menu:
1) . . . Outlet Control
2) . . . Manage Users
3) . . . Configuration
4) . . . Unit Status
5) . . . Reset Unit
6) . . . Logout
Enter Selection:
Summary of Contents for RPC-2
