manualshive.com logo in svg

BayTech RPC-2, Owner'S Manual

Share
Download
BayTech RPC-2 Owner'S Manual Download Page 68

RPC SERIES OWNER’S MANUAL
REPACKAGING, SHIPPING, AND RETURNING TO THE FACTORY
________________________________________________________________________________

61

REPACKAGING, SHIPPING AND
RETURNING TO THE FACTORY

If your Bay Tech unit needs service, upgrade, or repair, return it to
BayTech. Before dismantling your equipment or before returning the unit
for any reason, always call BayTech. The user should never attempt
repairs on this unit.  If you need to return the RPC Series to the factory for
repair, warranty work, or upgrade, follow the instructions below for
repackaging and shipping.

INSTRUCTIONS FOR REPACKAGING AND
SHIPPING:

a. Call BayTech to get a Return Authorization Number.

IMPORTANT: Without this number, BayTech will not accept
returns.

b. Use the original packaging if available or choose a heavy
    cardboard box.

c. Surround your unit with a minimum of two inches of insulation.

d. Be sure to seal the box securely with strapping or packing tape.
    We do not recommend masking tape or cellophane tape.

e. On the outside of the box, please write the Return Authorization

  

    Number.

f. Ship the unit to the following address:

Bay Technical Associates, Inc.
200 N. Second Street
Bay St. Louis, MS 39520-1000, USA

Summary of Contents for RPC-2

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands