9
We recommend replacing the hose together with the hose
holder. (Replacement hose set)
Art.-no. Description
127402 Replacement hose Flockmatic / Vario S
127403 Replacement hose set Flockmatic / Vario S
NOTE
If only the hose is replaced, you must strictly
ensure the following when mounting the hose
Firm seat of the hose on the nozzles.
The hose must not be fitted on twisted under
any circumstances.
You must ensure that the hose connectors
are firmly seated..
4.7
Winter care
For brief interruption of use (e.g. several days) no special
measures are required.
For longer interruptions of operation that extend over several
weeks, as in the case of winter care the following tasks must be
executed:
Remove the suction lance from the canister and rinse it with
water.
Seal the delivery container, store it in a cool and dry
location and protect against UV radiation.
Rinse the hose pump with water.
Take the dosing hose out of the pump.
Flush all hoses with water and empty them completely.
After the winter season, all components must be examined to
determine that they are functional. All dismounted parts must
be remounted at their intended position. Check the settings of
the Flockmatic Vario.
4.8
Decommissioning
If the device will be disposed of after its service life, it must be
flushed out and the water drained. The device has been
manufactured in accordance with the provisions of the ROHS
Directive and the Waste Electrical and Electronic Equipment
Directive. It does not belong in domestic waste.
Take the device to a suitable and appropriate collection point.
5
Technical data
Parameter
Value
Supply voltage
230VAC
Power consumption
max. 20VA
Ambient temperature
min.5 - max. 45°C
Delivery capacity
2,5 – 600ml/h
Counterpressure
max. 3 bar
Protection class -
housing
P65
Dimensions
(without mounting plate):
approx. 93 x 150 x 130 mm
(WxHxD)
6
Spare parts
Art.-No.
Picture
Description
127 450
Flockmatic Vario
172 130
Suction fitting, rigid PR
127403
Replacement hose set
Flockmatic / Vario S
127402
Pump hose Flockmatic /
Vario S
100 509
PE dosing hose 6x4X1
(10 m)
171 207
Injection nozzle, 0.5 bar
