6
3.3
Menu structure
3.4
Menu items
Basic view:
In the basic view the momentary delivery capacity is displayed,
and in operating status Off, the current mode is displayed.
Flockmatic configuration:
Input mode - delivery capacity
There are 2 possibilities for entering the delivery capacity:
1.
Input mode dosing capacity
If this input mode is selected the delivery capacity is
entered directly in ml/h (from 2.5 - 600 ml/h)
2.
Input mode - circulation parameters
If this input mode is selected the delivery capacity is
calculated based on the two parameters "dosing
quantity" and "circulation" that must be input.
The necessary dosing quantity of flocculent per m
3
of
circulation capacity depends on the concentration of
the flocculent used.
The circulation capacity is set in accordance with the
circulation pump used.
Available languages
The device can be configured for multiple languages.
Acoustic signal
The acoustic signal that is triggered when the filling level
of the canister for flocculent is low, can be activated or
deactivated. The visual alarm signal will always be output
regardless of this setting.
Output of the alarm via the PoolManager
®
/Analyt
(only devices with colour display):
If an alarm should not be output via the Flockmatic Vario,
but rather should be output via one of the devices cited,
then the BNC connector of the suction lance is connected
directly to the control device. In this case the input on the
Flockmatic Vario must be bypassed with a BNC
terminating connector.
In this case the Flockmatic Vario must be connected via
the module in the PoolManager
®
/Analyt that is provided for
this purpose.
See the PoolManager
®
/Analyt manual for more
information on connection and configuration.
