![background image](http://html1.mh-extra.com/html/bayrol/automatic-ph/automatic-ph_instructions-for-use-manual_2713053021.webp)
Congratulations on the purchase of your Automatic
pH
. You have chosen the easiest way to achieve a perfectly balanced pH
value in your pool.
Please be sure to read the “Safety instructions” supplement!
IMPORTANT: The Automatic
pH
must be installed by an experienced pool dealer to ensure proper functioning!
–
Please read these instructions carefully and make sure that all necessary parts for installation as well as all required tools
are at hand.
–
Failure to comply with these instructions may result in health and/or equipment and installation hazards!
–
Only use BAYROL water care products!
–
The housing of the Automatic
pH
does not have to be opened for installation.
–
Be sure to observe all general and special hazard warnings when handling liquid water care products.
–
Also observe all generally applicable safety regulations. Wear protective clothing if necessary.
1
Introduction
3
Water values
2
Scope of delivery
EN
1. Automatic
pH
2. Saddle clamp Ø 50 mm, 2 pcs
3. Pressure hose
4. Suction hose
5. Wall mounting set
6. Feed filter
7. Sensor holder
8. Injection valve
9. pH sensor
10. Canister lid with hole for suction
hose
11. Cleaning solution for sensor
12. Buffer solution pH 7
13. Teflon tape
Alkalinity/TAC (mg/l)
pH value (pH)
Recommended values
Min. 80
7.2
Tolerated values
Min. 80
7.0 – 7.4
To lift
Add BAYROL Alca-Plus
®
Add pH-Plus Liquid
To lower
–
Add pH-Minus Liquid Domestic
Test during season
monthly
weekly
21