Bay Tek Games PRIZE HUB Hybrid, Service Manual

Page: 12 / 57

12
BARCODE SCANNER PROGRAMMING
If a failure were to occur that caused the scanner to become inoperable, follow these steps to re-register the
scanner. Identify the brand of scanner included in your Prize Hub, then use the appropriate instruc-
tions for that model.
Honeywell Scanner Programming
Tear out page 55 of this manual and cut on the dotted lines.
Follow these instructions:
1. Press and hold the scanner button to scan barcode 1. You will hear a confirmation beep when it
scans correctly, the white and blue LEDs on the scanner will blink alternately
2. Press and hold the scanner button to scan barcode 2. You will hear a confirmation beep when it
scans correctly.
3. Press and hold the scanner button to scan barcode 3. You will hear a confirmation beep when it
scans correctly.
4. Press and hold the scanner button to scan barcode 4. You will hear a confirmation beep when it
scans correctly.
5. Press and hold the scanner button to scan barcode 5. You will hear a three beeps when it scans
correctly, the white and blue LEDs will stop blinking.
ZEBEX Scanner Programming
Tear out page 57 of this manual and cut on the dotted lines.
Follow these instructions:
1. Scan the first code- “Set All Defaults”
2. Scan the second code- “Presentation Mode”
3. Scan the third code- “Enable Interleaved 2 of 5”
4. Scan the fourth code- “ Two Discrete Lenghts”
5. Scan the number codes in the following sequence:
1 4 1 6