Supplied By www.heating spares.co Tel. 0161 620 6677
10
COMMISSIONING THE FIRE - Page 10
Purge any air from the gas inlet and make good the gas
connection. Switch on the gas. Check for gas soundness.
Remove the glass frame by disengaging the retaining
clamps and lifting away. Remove the polystyrene packing
piece securing the coal bed in position.
Remove the coal bed from its plastic bag and carefully
replace in position on the burner.
CAUTION: The coal bed is extremely fragile and must
be handled accordingly. Gloves should be worn and any
inhalation of the dust should be avoided. Keep the coals
away from children at all times. Please read the
Important Information section on page 3.
Remove any labels fixed to the glass frame assembly
and clean both sides of the glass panels before
replacing the glass frame.
Replace the glass frame and lock in place by engaging the
retaining clamps.
Take the lead provided and fit the plug into the socket on the
fire. Connect to the electricity supply, taking care to route the
cable so that it will not come into contact with any hot
surface.