Removing the cable guide
1.
Before removing the cable guide please note that the wider part of the cable guide is
on the outer edge of the base (See figure 1- Item 1).
2.
To remove the cable guide push and lift the tab on
the bottom. The bottom of the cable guide will open
(See figure 1- Item 2).
3.
Lift the electric cable clear of the cable guide.
4.
Hold the bottom of the cable guide close to the
heater then gently pull the cable guide away from
the rectangular slot (See figure 1- Item 3).
Fitting the cable guide.
When fitting the cable guide please remember that
the wider part of the cable guide has to be fitted
against the outer edge of the base (See figure 1- Item
1).
1.
Gently pinch the sides of the cable guide (See
figure 1 - Item 4) and push the cable guide into the
required rectangular slot.
2.
Place the electrical cable into the guide and close
the top of the cable guide.
If the electric cable is damaged, to avoid a hazard it
must be replaced by a Baxi Fires Division authorised
service agent, or similarly qualified person (See the
last page of this guide for useful telephone
numbers).
All external wiring between the heater and the
electrical supply shall comply with current IEE
regulations.
Page 7
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 1. Removing and
positioning the cable guide.
Item 1
Item 2
Item 3
Item 4
