Page 21
11. FIRE FRONT / CASTING INSTALLATION
11.1 Fitting the Avignon and Harmony firefront casting.
1.
Place the front casting in position between the sides of the fascia.
2.
Place the bottom front cover casting below the front casting.
11.2 Fitting the Avignon Aspire firefront.
1.
Place the firefront centrally between the sides of the fascia.
12. CERAMIC COALS INSTALLATION
This section is for models supplied with ‘Coal’ effect fuel bed only.
For ‘Pebble effect fuel bed’ see section 13.
1.
Place the rear base coal in the firebox. It
should rest on the ledges at the rear sides of
the burner unit. When located gently move the
rear base coal so that it is as far forward as
possible. The amount of movement will be
negligible (See figure 19).
2.
Place the front base coal in the firebox with
its bottom front locating over the front rim of
the firebox. Pull the coal forward so that it
locates immediately behind the front rim of
the firebox (See figure 20).The front base
coal will touch the rear base coal as it is
located.
There are two types of loose coals. These
are identified with the letter “A” or “B” on
the underside of the coal.
There are three “A” coals and two “B”
coals.
INSTALLER GUIDE
Figure 20. Front base coal position
Figure 19. Rear base coal position
