background image

16

WE RECOMMEND FOR YOUR SAFETY

• Always observe a suffi cient safety distance from persons and objects.   
• Do not underestimate the weightiness of rotating rotor blades.
• Always observe legal regulations.
• Keep your distance from radar stations, transmission masts and other radio interference sources.
• When passing on the model to third parties, always pass on these warning notes as well!

DISCLAIMER  

Installation, adjustment and operation of the autopilot and a helicopter require appropriate skills. Errors and lack of attention can result in accidents involving 
severe personal injury and/or property damage or even traffi c accidents. As the manufacturer and seller have no infl uence on correct handling, these risks are 
expressly pointed out. Liability for all manner of damage resulting from operation, even due to disruptions of the built-in instruments or signal transmission, is 
fundamentally ruled out, insofar as legally possible.

WARRANTY

We assume a warranty of 24 months for this device.
Any repairs performed will not extend the warranty period. During the warranty period, we will remedy any occurring malfunctions or manufacturing or material 
fl aws free of charge. Further claims, e.g. in the event of consequential damages, will be ruled out. The unit must be transported to us at no expense to us, and 
it will also be returned at no expense to us. We cannot accept unpaid consignments. We cannot assume any liability for transportation damage and loss of your 
consignment. We recommend appropriate insurance. 

 
THE FOLLOWING PREREQUISITES MUST BE MET FOR PROCESSING OF YOUR WARRANTY CLAIMS:  
• Purchase receipt included with the consignment. 
• The devices have been operated in compliance with the operating instructions.  
• The device has not suffered any moisture damage, unauthorised tampering,  
   excess voltages, overloads or mechanical damage. 
• If possible, include pertinent hints on how to detect the fault.  

NOTE
This document contains legally protected information. All rights reserved.
The content of this document can be amended or adapted without prior announcement.

The bavarianDEMON may be modifi ed at any time on the basis of ongoing tests and resulting improvements. Please inform yourself regularly about current 
versions of the instructions, bavarianDEMON fi rmware and PC software.

The manufacturer provides no warranty for operability and usefulness in specifi c applications

The manufacturer is not liable for errors in this documentation and resulting damages in connection with equipment, performance 
or use of the material.

Summary of Contents for 3SX



















Reviews: