manualshive.com logo in svg

Baumuller AIO Series, Instruction Handbook Manual

Share
Download
Baumuller AIO Series Instruction Handbook Manual Download Page 5

5

of 82

 Instruction handbook 

b maXX

 

(BM4-F-)AIO-XX (Analog IO module)

Document  No.: 5.01045.08

1

G

ENERAL

1.1

Information on this Instruction handbook

The 

AIO-XX

 or 

BM4-F-AIO-XX

 can be operated in combination with a 

b maXX 4000

, 

only.

Therefore this Instruction handbook is an addition to the Instruction handbook of 

b maXX

BM4400, BM4400 ES, BM4600, BM4600 ES, BM4700, BM4700 ES (short 

b maXX 4000

) 

5.12008.

The basic prerequisite for safe working is compliance with all the safety and handling in-
structions stated in the instruction handbook 

b maXX 4000

. 

Additionally, the valid accident prevention regulations and general safety regulations ap-
plicable to the scope of application the device must be complied with.

Read this Instruction handbook and the Instruction handbook 

b maXX 4000

, particularly 

the safety notes chapter, completely before beginning any work on the device. This In-
struction handbook is part of the product and must be kept accessible to personnel at all 
times in the immediate vicinity of the device.

Summary of Contents for AIO Series





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands