Baumuller AIO Series Page 34 Instruction Handbook Manual Download

Page: 34 / 84

Assembly

Instruction handbook

b maXX

(BM4-F-)AIO-XX (Analog IO module)

Document No.: 5.01045.08

Baumüller Nürnberg GmbH

of 82

6.2

Assembly

Switch off the

b maXX

BM4000

and assure it against unintentional switching on during

mounting.

Pull off the design cover towards the front from the controller unit

Look at the controller unit for the provided slot

Figure 6:

Mounting

WARNING!

Danger as a result of faulty mounting!

The mounting requires qualified personnel with adequate experience. Faulty mount-
ing can lead to life-threatening situations or substantial material damage.

Therefore:

Only allow mounting to be performed by employees of the manufacturer or by oth-
er qualified personnel.

DANGER!

Risk of fatal injury from electrical current!

There is an immediate risk of fatal injury if live electrical parts are contacted.

Therefore:

Switch off the current when any kind of work is being performed on the electrical
system and ensure safety before switching on again.

Pay attention to the relevant safety instructions when handling electrical equip-
ment carrying high voltages.

Do not touch electrically live parts before taking into account the discharge time of
the capacitors

Summary of Contents for AIO Series





















































































Search results

Summary of Contents for AIO Series

Reviews:

Related manuals for AIO Series

Brands by name

Popular brands

Baumuller AIO Series, Instruction Handbook Manual

Search results

Summary of Contents for AIO Series

Reviews:

Related manuals for AIO Series

Brands by name

Popular brands