Baumer Ident OIS-P PC 3100 series, Installation Manual

Page: 31 / 46

OIS-P, PC3141/03 Manual Baumer Ident 31
Installation and trouble-shooting tools
7.1 Communicator Set-Up
The Set-Up of selectable communicator functions is
done by opening the cover of the unit. This will
reveal the CPU4-board that contains DIL-switches
as in Figure 7.1 below.
Figure 7.1 CPU4 board lay-out
b o a r
The CPU-4 board has 3 sets of DIL switches which
are used to set functional options.
SW1:1
On: Object detect to be used (default)
SW1:2
On: Status to be sent automatically
Off: (default)
SW1:3
On: Extended I/O ( 5 inputs and
6 outputs available)
Off: (default)
SW1:4
On: Timeout option used (4 s) (default)
SW1:5
On: Delayed response (50 ms)
Off: (default)
SW1:6
On: High priority commands
allowed (AP)
Off (default)
SW1:7
Off
SW1:8
Off
The use of SW2 is depending on the used
communication protocol.
7 Installation and trouble-shooting