background image

          

 

1. TECHNICAL DATA 
 
 

MODELS MEGACHEF 

1-2 

Voltage 230V 
Current 16 

Sole heating element 

1000 W 

upper heating element 

900 W 

Circular heating element 

2300 W 

Glass ceramic grill 

1315 W 

Maximum power 

3400 W 

Dimensions 596 

596 

x600 

 
 
 
 
 
 
 
2. PRELIMINARY REMARKS 

 
Please read this booklet thoroughly before you install and use this appliance. It is important that you 
understand all the control functions before commencing to cook with this oven.

 

 
Warnings 

 

• 

This oven is intended to be used only for baking purposes, therefore improper uses are not admitted.  

• 

This oven must be used only by adult persons in good physical conditions. Please ensure that 
children are kept under close supervision at all times. 

• 

 Avoid the contact  with inner surfaces  and the door of the oven , as they can reach high 
temperatures during baking and remain hot also after appliance had been turned off. 

• 

Cleaning operations must be carried out only when the equipment get cold. 

• 

 Use always the suited  handle for opening the door of the oven. 

• 

The appliance must be disconnected from  the mains before executing cleaning operations. 

• 

In the event of malfunctions of the oven and if no explanations are found in the present manual, 
please turn off the appliance and call the technical service. 

• 

Repairs may only be carried out by authorized specialist. 

• 

Packaging materials used are environmentally friendly and can be recycled. Please discard of all 
packaging material with due regard for the environment. 

• 

Monthly  execute cleaning and maintenance operations. 

• 

Keep  this instruction manual save for persons not trained to oven use. 

 

 

3. DECLARATION OF CONFORMITY 

 
In the parts destined to come into contact with foodstuffs, this appliance is in accordance with the requirements of 
the EC directive 89/109 transposed in the Italian Legislative Decree N° 108 of 25/01/92. 

 

CE 

Appliance conforming to the European directives 89/336/EEC, 93/68/EEC, 73/23/EEC and subsequent 

revisions. 

 
The manufacturer declares that the oven is built using certified materials and requires to install this appliance 
according to the standards in force. This appliance must be used by trained person only for household 
purpose. 
 

4. INSTALLATION 

 
 
The installation must be carried out by qualified personnel according to: 
 

• 

Safety standards in force. 

• 

Local electricity supply company advises. 

 

 
 

 

2

Summary of Contents for MEGACHEF2SS

















Reviews: