Electric connections
•
Check the details given on the rating plate situated on the oven making sure that the rated mains
voltage and power available are suitable for its operation.
•
Before making the electric connections, check the efficiency of the earthing system. Earthing of the
oven is compulsory by law. The manufacturer will accept no liability for any personal injury or
damage to property deriving from failure to comply with this requirement.
•
If you prefer to make a fixed connection to the mains, insert an all-pole circuit breaker with a breaking gap
of at least 3 mm between the cook top and the mains.
•
To connect the oven power cord, loosen and remove the cover on the terminal block in order to
access the contacts inside. Make the connection, blocking the cord in place with the cable clamp
provided and then close the terminal block cover again immediately.
•
If you have to change the cord, the earthing (yellow / green) conductor must always be 10 mm
longer than the line conductors.
•
If damaged, the cable must be replaced with one supplied by the technical assistance service.
Fixing the oven to the unit
•
Mark on the piece of furniture the measure for the positioning of the blocking supports.
•
Fix to the piece of furniture the blocking supports
.
•
Place the oven on the piece of kitchen furniture so to be installed.
•
The holes of the blocking screws are: top right and top left the frontal frame of the oven.
•
Fix the oven with the screws.
3