It is necessary to carry out the operations described in the exact order given below, to allow access
to the rear part of the door frame.
The door has two pivots which go to the locking assembl ies. They are placed behind the door
frame. On the opposite side of the frame there are two plates which cover the holes.
F- Loosen the screws which fix the locking assemblies and the cover plates to the stainless steel
sides and reverse the position of all of these parts.
IMPORTANT: Do not damage the oven insulating material when completing this section of the
door reversal process.
G- Reverse the positions of the pivot and the cylindrical insert on the lower holders
