Matriculation plate data
The matriculation plate data are positioned on:
o
1 label on the external cardboard packaging.
o
2 device plates, positioned at the centre top of the container and
below the drawer.
WARNING: Do not remove, damage or adjust the matriculation
plate attached to the device.
Electrical connection
We recommend that the appliance is connected by a
qualified electrician, who is a member of the N.I.C.E.I.C.
and who will comply with the I.E.E. and local regulations.
o
Your vacuum-packer comes supplied with a standard 16A Schuko
plug and a power cable which is 150 cm long. The plug should
have a 10A fuse and be easily accessible.
WARNING: If the full length of the cable is not used DO NOT
wind it back on itself. Leave it unwound and ensure that it is
not a tripping hazard.
o
The wiring in the mains lead is coloured as follows:
Brown
Live
Blue
Neutral
Green and yellow
Earth
o
As the colours of the wires in the appliance’s mains lead may not
correspond with the coloured markings identifying the terminals
in your spur box, please proceed as follows:
The
brown wire
must be connected to the terminal marked “L”
(live), or coloured
red.
28