Brief preserving cycle for containers
This cycle can be used for plastic (polycarbonate)
containers. This cycle lasts approximately one minute.
o
After following the steps in the preparation section, outlined on
page 17, close the lid by pressing lightly on its front and
selecting the brief preserving cycle button at the same time.
o
When the cycle begins an acoustic short beep sounds.
The cycle proceeds automatically in the following order:
o
The
evacuation
phase is signalled by the LED for the brief
preserving cycle button flashing. This phase lasts about thirty
seconds.
o
During the next
discharge
phase, all the LED’s revert to the
initial start-up mode. The discharge valve remains open for
approximately twenty seconds.
o
At the end of the cycle, an acoustic short beep will sound which
indicates that the appliance is ready for a new cycle.
o
The basin appears decompressed which enables the container to
be extracted.
o
Close the container air-evacuation valve quickly in order to avoid
air coming back into the container.
The cycle can be interrupted early by pressing the stop button.
18