Instructions for use, installation and connection
24
Removing oven door with a
single axe hinge
Open the door completely and turn the
removable locks backwards (see fig).
Then close the door slowly and let the
locks fit to the notches. At an angle of
about 15
q
lift the door slightly up and pull
the door from the hinge supports (fig. 2).
For reinserting the door repeat the
procedure backwards. Insert the door at
an angle of about 15
q
into the hinge
supports by pushing them forward and
downwards, so the hinges lock into their
slots (fig. 3). Check if the hinges are
locked into their respective slots.
Now open the door completely and turn
the removable locks into their original
position. Close the door slowly and
check if they close properly (fig. 4). If you
have trouble closing the door, check if
the hinges are properly inserted into their
slots.
Attention
! Never let the hinge locks
spring out, as the springs are strong and
may cause injuries.
Accessories
Accessories, like biscuit tray, oven grid,
etc. are cleaned with hot water and the
usual detergent.
Special enamel
Oven, interior door lining, baking tray and
grease interception pan are coated with
special enamel, with smooth and
resistant surface.
This special coating facilitates cleaning
at room temperature.
Grease filter
Clean the grease filter after each use
with soft brush in hot water with some
detergent, or wash it in the dishwasher.
Before placing it in the dishwasher the
grease on the filter must be softened in
water.
Oven drawer
x
The oven drawer is protected from
accidental opening.
x
It may be open by lifting upwards. To
remove the drawer from the cooker pull it
out to the limit, then lift upwards and pull
out completely.
x
Never place any flammable or explosive
substances in the drawer.
x
The drawer is equipped with side slides
on wheels. To insert it back, slide the
wheels into the slide guides and push
inwards
