Baumatic BMEH381I, Instructions For Use And Installation

Page: 6 / 32

6
Installation procedure
• Worktop must be placed absolutely horizontal.
• Suitably protect the edges of the cut aperture.
• Connect the cooking hob to the mains power supply (see instructions for the connection of the
cooking hob to mains power supply).
• Put the supplied springs in their places.
• Insert the hob into the cut aperture.
• Press the hob firmly towards the worktop from above.
CONNECTION TO THE POWER SUPPLY
• Connections may be carried out by a qualified technician only. The earth protection must
comply with the standing regulations.
• Connection terminals are revealed when the connection box cover is removed.
• Prior any attempted connection check that the voltage indicated on the rating plate is in line
with your home power supply.
• The rating plate is located underneath the appliance.
• The appliance is manufactured for use with the power supply voltage 220-240 V ~.
• In order to make a fixed connection to the mains, insert an all-pole circuit breaker between the
appliance and the mains. This device shall have a contact separation in all poles, providing full
disconnection under overvoltage category III conditions.
• Such appliances are allowed to be mounted on one side next to a high kitchen cabinet, the
height of which may exceed that of the appliance. On the opposite side however, only a kitchen
cabinet of equal height as the appliance is allowed.
• Upon the completion of installation, live wires and isolated cables must be adequately
protected against accidental touching.
Basic adjustment of
sensors to the
ambience Upon each connection to the power supply the sensors of the appliance are automatically
adjusted to the environment to ensure their proper function. All displays turn on and are fully
illuminated for a few seconds.
During the adjustment procedure the sensors must be free of any objects, otherwise the
adjustment procedure will be interrupted until such objects are removed from the sensor surface.
During this period the regulation of the cooktop is impossible.
ATTENTION !
Before attempting any repairs on the appliance, disconnect the power supply. In accordance with
the mains voltage the appliance should be connected in line with the attached diagram.
The earth wire must be connected to the terminal marked with the earth symbol.
The connection cable must lead through the relief safety device, protecting it from accidental
pulling out. Upon the completion of installation switch all the hotplates on for about 3 minutes to
check the proper functioning.
Installation diagram Connection must be carried out by means of:
- cables, model H05RR-F
- cables, model H07RN
BMEH381I
LIVE L BROWN
EARTH GREEN / YELLOW
NEUTRAL N BLUE
BMEH62I