Baumatic BMEH381I, Instructions For Use And Installation

Page: 9 / 32

9
OPERATION
• After turning the ceramic glass hob on all displays come on for a moment. The hob is ready for
operation.
• The hob is fitted with electronic sensors which are switched on if you touch the relevant circle
for at least one second.
• Each sensor’ activation is followed by a sound signal.
• Avoid placing any objects on sensor surface (possible error signalization_
).
• Always keep the sensor surface clean.
Hob control elements
A. ON/OFF sensor of cooktop
B. Safety lock on/off and child lock sensor
C. Pause and recall function sensor
D. Sensor (-) of timer
E. Sensor (+) of timer
F. Warming function sensor
G. Slide control
Slide control power
0
Medium power
Full power
Activating the hob Touch the (A) sensor for at least one second. The hob is now active, and all hotplate power
indicators indicate »0«.
Now you need to select the next setting within 10 seconds, otherwise the hob switches off
again.
Turning hotplates on After turning the hob on using the (A) sensor, within the next 10 seconds start one of the
hotplates.
• Set the power level 1-9 by touching the slider (F). At the first touch, the level is set according
to the part of the slider that you touch. Upon the slider, the control LEDs light up, according to
the level set. By sliding along the slider, the power level setting is changed. By sliding to the
right, the level increasing, while sliding to the left decreases the level. When you move your
finger away from the slider, the cooking field starts to operate at the level set.
If a specific point of slide control is pressed for at least 3 seconds, the automatic cooking is
activated (see Automatic fast heating).
Changing hotplate power settings
• By touching or sliding along the slide sensor (F) you change power setting.
• When you remove the finger from the slide sensor, the hotplate starts to operate at selected
power.
Switching hotplates off
• Selected hotplate must be activated.
• By touching the slide sensor (F) at the start, bring the power setting to “0”. Short beep
confirms the OFF position.