Baumatic BMEH381I, Instructions For Use And Installation

Page: 22 / 32

22
Remaining heat indicator Glass ceramic hob also
features remaining heat indicator “H”. Hotplates are not heated
directly, but through return heat radiating from the dish. As long as the symbol “H” is on
after the hotplate was switched off, the remaining heat may be used for warming up food
or for melting.
Even when the symbol “H” disappears, the hotplate may still be hot.
Be careful of burns!
Extra powerful setting
(hotplates marked “P”) Extra powerful setting may be additionally switched on for fast cooking on indicated
hotplates. This extra hotplate power is used for heating large quantities of food.
After switching on, the extra power is activated for 10 minutes then automatically switches
back on to the maximum normal level 9.
During the time extra power is activated, the power of other hotplates is limited. This is
indicated on the power display by intermittently flashing the selected cooking level and
limited power for a few seconds.
Activating extra powerful setting
• Press the (H) sensor of the required cooking zone, the extra cooking is active. The
display shows “P”.
Premature turning extra powerful setting off
• Press and scroll on the cursor of the wanted zone, until you get to “0” if you want to turn
off the zone, or until the wanted cooking level.
Heat up time automatic
When automatic cooking mode is activated the hotplate will operate at maximum power for
a limited period of time and then automatically switch to the reduced power level to resume
cooking. It may be switched on in any of the hotplates for all power settings except for
setting “9” where power is set at maximum all the time.
Automatic cooking mode is activated on any idle hotplate.
• Choose the required continuous cooking level and hold it for 3 seconds.
• The activated heat up time automatic will be displayed through alternating between „A”
and the selected continuous cooking level on the display.
As soon as the parboiling time is over, the preselected continuous cooking level is valid
again.
Once the time from the chart below expires, the function is switched off and “A”
disappears.
You can also switch the automatic cooking mode off anytime by bringing power setting to
“0”.
Power setting 1 2 3 4 5 6 7 8
Max. power
cooking time
48’’ 1’44’’ 2’28’’ 3’12’’ 4’08’’ 1’20’’ 1’68’’ 2’16’’
Bridge Function
With the bridge function two separate cooking elements /inductors with the same diameter
and equal power can be turned on at the same time and controlled with only one
operation.
Activating Bridge Function
Whether the two zones are working at a different level, whether they are at level 0:
• Simultaneously press anywhere on the slider (F) of the zones
• Now the two areas work together, the LEDs to the right of the corresponding displays
turn on. The level is shown on the display of the control zone, in the meanwhile the
controlled zone’s display turns off.
• When this function is active, you can set the timer, the LED lights on near both displays
of the zones
, moreover it’s not possible setting a particularly powerful cooking function.