Baumatic BMEH381I, Instructions For Use And Installation

Page: 13 / 32

13
Operation time can be set for each hotplate separately.
Changing pre-set cooking time
• Cooking time can be changed anytime during the operation.
• Simultaneously press sensor (E) and (D).
• Simultaneously press (D + E) as many times as necessary, to select the zone of which you
want to adjust the timer. The zone is identified by the lighting on of of the LED to the right of
the display.
• Press the sensors (D) or (E).
• If time is not modified in 10 seconds since pressing the sensor (D+E), the timer is keeping the
count-down before the adjusting operation.
Checking remaining cooking time
• Last set timer is always displayed, (the LED to the right of the display of the cooking zone in
question has a lighting stronger than the others).
• Simultaneously press sensor (E) and (D).
• Simultaneously press (D + E) as many times as necessary, to select the zone of which you
want to see the remaining time. The zone is identified by the lighting on of the LED to the right
of the display.
• The timer's display will display the remaining time of the selected cooking zone.
Turning timer off
When pre-set time elapses, a beep signals the end, and the hotplate is switched off. Switch off
the alarm by pressing the sensor (D) or (E) or it switches off automatically after 2 minutes.
If you want to switch off the timer prior the end of pre-set time:
• Simultaneously press sensor (E) and (D).
• Simultaneously press (D + E) as many times as necessary, to select the zone of which you
want to disable the timer. The zone is identified by the lighting on of the LED to the right of the
display.
• Press (D) to the value “0”.
• The illuminated point to the left part of the display is turned off and the timer is deactivated.
Alarm timer function Timer can be used as alarm also if it is already employed in timer control of one of the hotplates.
Timer setting
With the hob off:
• Touch the sensor (A) to activate the cooking hob.
•
Simultaneously press sensor (E) and (D) to activate the timer.
The timer's display
shows “0.00” and:
-
If some cooking zone is active: the LED to the right of the display, of the first active
cooking zone from the left, lights on.
Simultaneously press (D+E) as many times as necessary to select the alarm. The respective
LED is located between the keys (E) and (D).
-
If no cooking zone is active: the al
arm’s LED lights on.
• The timer value is set by pressing sensors (D) o (E).
It’s possibile setting time in minutes and hours or in hours and minutes also for
the alarm.