Core probe malfunction:
o
It is not possible to restart the cycles which use the food
probe. If any of these cycles, which are in progress, are
interrupted, the appliance will go into an alarm state. The
core probe icon
(9)
will continue to flash until the appliance is
reset.
o
To reset the appliance, press buttons
(1)
and
(6)
simultaneously for a few seconds until a double
buzzer sounds. The appliance will then switch off.
Voluntary interruption:
o
You can switch off the appliance at any moment using the
ON / OFF button
(17)
. In this case, all the cycles, except
the bottle and can cycles go into an alarm state.
o
To reset the appliance press the buttons
(1)
and
(6)
simultaneously for a few seconds until a double
buzzer sounds. The appliance will then switch off.
IMPORTANT: If your appliance appears not to be
operating correctly, then you should disconnect it
from your mains supply and then contact
Baumatic Customer Care on telephone number
(0118) 933 6911.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE
YOURSELF.
Please note that if an engineer is asked to attend whilst the product is
under guarantee and finds that the problem is not the result of an
appliance fault, then you may be liable for the cost of the call out
charge.
The appliance must be accessible for the engineer to perform
any necessary repair. If your appliance is installed in such a
way that an engineer is concerned that damage will be caused
to the appliance or your kitchen, then he will not complete a
repair.
This includes situations where appliances have been tiled in,
sealed in with sealant, have wooden obstructions placed in
front of the appliance, like plinths. Or any installation other
than the one specified by Baumatic Ltd. has been completed.
Please refer to the conditions of guarantee that appear on the
warranty card that you receive with the appliance.
30
Summary of Contents for BBC460SS
Page 1: ...He BBC460SS Blast chiller...
Page 32: ...35...
