Maintenance
62
Check the air cleaner service indicator
(if equipped).
Check the maximum intake resistance
only when the gas engine is running
under full load.
When the intake resistance reaches
the maximum permissible limit, clean
or replaces the filter element as per
the manufacturer‟s instructions.
Press the button at the top to reset.
Replace the engine oil
Run engine to warm oil slightly.
Stop engine.
Loosen drain nut . Drain oil into the
container.
Check the oil level after finished.
Start engine and let it be idle for 1
minute. Check for oil leaks at engine
oil filter. Tighten only enough to stop
leaks.
CAUTION:
Be careful when draining hot engine oil.
Hot engine oil can cause burns to
unprotected skin.