manualshive.com logo in svg

Basler L800k, User Manual, Page: 75 / 168

Share
Download
Basler L800k User Manual Download Page 75

Operation and Features

BASLER L800

k

3-35

Draft

3.9.4.2 Changes to the Maximum Line Rate 

Use of the two-line averaging feature has an effect on the camera’s maximum achievable line rate.

See Section 

3.4

.

3.9.4.3 Enabling/Disabling Two-line Averaging 

You can enable or disable two-line averaging with the Camera Configuration Tool Plus (CCT+) or
by using binary write commands from within your own application to set the camera’s control and
status registers (CSRs).

With the CCT+

With the CCT+ (see Section 

4.1

), you use the Two-line Averaging parameter in the Image

Enhancement parameters group to enable or disable two-line averaging.

By Setting CSRs

You enable or disable two-line averaging by writing a value to the Mode field of the Two-line
Averaging CSR (see page 

4-41

).

Section 

4.2.2

 explains CSRs. Section 

4.3.1

 explains using read/write commands.

Summary of Contents for L800k









































































































































































Reviews:

No comments