manualshive.com logo in svg

Basler L800k, User Manual, Page: 137 / 168

Share
Download
Basler L800k User Manual Download Page 137

Configuring the Camera

BASLER L800

k

4-51

Draft

Shading Value CSR

See Section 

4.2.3.1

 for information about using bulk data control registers.

Register Base Address:

 0x2A00

Field Name:

 Register Status

Offset:

 0x0000

Size:

 1 Byte

Type:

 Read only

Description:

The integer value in this field indicates the status of this control register:

0x00 = The register is not available

0x01 = The register is available. All related settings are OK

0x80 = A value in this register is set out of range

Field Name:

 Control

Offset:

 0x0001

Size:

 1 Byte

Type:

 Read / Write

Description:

Writing an integer value to this field selects a bulk data control function:

0x00 = Enumerate

0x01 = ENext

0x02 = Read

0x03 = Write

0x05 = Activate

0x06 = Create

Field Name:

 Info

Offset:

 0x0002

Size:

 1 Byte

Type:

 Read only

Description:

If you are performing a bulk data read or write operation, this field will indicate when no 
more data exits:

0x00 = More data exists

0x01 = No more data exists

0x03 = File operation error

0x04 = This is an activated file

Field Name:

 File Name

Offset:

 0x003

Size:

 20 Bytes

Type:

 Read / Write

Description:

Character string indicating the name of a bulk data file. The field contains 20 characters 
(left-aligned, zero-padded).

Field Name:

 Size

Offset:

 0x0017

Size:

 4 Bytes

Type:

 Read only

Description:

If the file name refers to an already existing bulk data file, this field will contain the file size 
in bytes. Otherwise, the field contains zeros.

Field Name:

 Data

Offset:

 0x001B

Size:

 1 Varies

Type:

 Read / Write

Description:

Byte-sized register that is used to sequentially write to or read from a bulk data file.

L

You can save up to one shading value file in the non-volatile memory.

There is a restriction on naming the file that holds the saved shading values. The
file must be named ShadingValues.

Summary of Contents for L800k









































































































































































Reviews:

No comments